Verify that all servers to be joined to the cluster meet the following general requirements.
The following table lists the minimum and recommended storage requirements according to the disk roles (refer to About the storage cluster):
|System||One disk per node||100 GB SATA/SAS HDD||250 GB SATA/SAS SSD|
One disk per node
Five disks recommended for one cluster
|100 GB enterprise-grade SSD with power loss protection, 1 DWPD endurance minimum|
One SSD disk per 4-12 HDDs
|100+ GB enterprise-grade SSD with power loss protection and 75 MB/s sequential write performance per serviced HDD; 1 DWPD endurance minimum, 10 DWPD recommended|
At least one per cluster
100 GB minimum, 16 TB maximum recommended
SATA/SAS HDD or SATA/SAS/NVMe SSD (enterprise-grade with power loss protection, 1 DWPD endurance minimum)
The following table lists the amount of RAM and CPU cores that will be reserved on one node, according to the services you will use:
|Service||Management node||Secondary node|
|RAM1||CPU cores2||RAM3||CPU cores4|
|System||4.5 GB||3.3 cores||1.5 GB||1.1 cores|
|Storage services: each disk with Metadata, Storage, or Cache role (any size)5||0.5 GB||0.2 cores||0.5 GB||0.2 cores|
|Compute service6||10 GB||4 cores|
|Load balancer||1.5 GB||0.5 cores|
|Kubernetes||1 GB||0.5 cores|
|Backup Gateway7||1 GB||0.5 cores||1 GB||0.5 cores|
|S38||S3 gateway||256 MB||1 core||256 MB||1 core|
|Object service||256 MB||0.1 cores||256 MB||0.1 cores|
|Name service||512 MB||0.2 cores||512 MB||0.2 cores|
|NFS||Service||4 GB||1 core||4 GB||1 core|
|Each share9||up to 9 GB||up to 8 cores||up to 9 GB||up to 8 cores|
|iSCSI||1 GB||1 core||1 GB||1 core|
These reserved values correspond to absolute minimum requirements. In general, the more resources you provide for your cluster, the better it works. All extra RAM is used to cache disk reads, while extra CPU cores increase the performance and reduce latency.
The following table lists the current RAM and CPU limits for Virtuozzo Hybrid Infrastructure servers:
|RAM||64 TB||1 TB|
|CPU||5120 logical CPUs10||384 logical CPUs11|
- The minimum CPU frequency for Virtuozzo Hybrid Infrastructure servers is 2.0 GHz. The recommended CPU frequency is at least 2.4 GHz.
- CPU frequency affects the cluster performance. Higher CPU frequency reduces latency almost linearly, thus increasing the performance. If other CPU parameters are the same, higher CPU frequency is preferable to a larger number of CPU cores.
- Nodes running the metadata service should have high CPU frequency, because this service is CPU intensive.
At least 2 x 10 GbE interfaces are recommended, for internal and external traffic; 25 GbE, 40 GbE, and 100 GbE are even better. Bonding is recommended. However, for external traffic, you can start with 1 GbE links, but they can limit cluster throughput on modern loads.