Updating IPsec connections
PUT /v2.0/vpn/ipsec-site-connections/{connection_id}
Update connection settings for an IPsec connection.
Request
Parameters
Name | In | Type | Description |
---|---|---|---|
connection_id
|
path | string | The ID of the IPsec site-to-site connection. |
ipsec_site_connection
|
body | object | An ipsec_site_connection object. |
local_ep_group_id (Optional) |
body | string | The ID for the endpoint group that contains private subnets for the local side of the connection. You must specify this parameter with the peer_ep_group_id parameter. |
peer_address
|
body | string | The peer gateway public IPv4 or IPv6 address or FQDN. |
peer_id
|
body | string | The peer router identity for authentication. A valid value is an IPv4 address, IPv6 address, e-mail address, key ID, or FQDN. Typically, this value matches the peer_address value. |
psk
|
body | string | The pre-shared key. A valid value is any string. |
name (Optional) |
body | string | A human-readable name of the resource. Default is an empty string. |
description (Optional) |
body | string | A human-readable description for the resource. Default is an empty string. |
initiator (Optional) |
body | string | Indicates whether this VPN can only respond to connections or both respond to and initiate connections. A valid value is response-only or bi-directional . Default is bi-directional . |
admin_state_up
|
body | boolean | The administrative state of the resource, which is up (true ) or down (false ). |
interval (Optional) |
body | integer | The dead peer detection (DPD) interval, in seconds. A valid value is a positive integer. Default is 30. |
mtu
|
body | integer | The maximum transmission unit (MTU) value to address fragmentation. Minimum value is 68 for IPv4, and 1280 for IPv6. |
peer_ep_group_id (Optional) |
body | string | The ID for the endpoint group that contains private CIDRs in the form <net_address>/<prefix> for the peer side of the connection. You must specify this parameter with the local_ep_group_id parameter. |
dpd (Optional) |
body | object | A dictionary with dead peer detection (DPD) protocol controls. |
timeout
|
body | integer | The dead peer detection (DPD) timeout in seconds. A valid value is a positive integer that is greater than the DPD interval value. Default is 120. |
action
|
body | string | The dead peer detection (DPD) action. A valid value is clear , hold , restart , disabled , or restart-by-peer . Default value is hold . |
local_id (Optional) |
body | string | An ID to be used instead of the external IP address for a virtual router used in traffic between instances on different networks in east-west traffic. Most often, local ID would be domain name, email address, etc. If this is not configured then the external IP address will be used as the ID. |
Example
# curl -ks -X PUT -H 'Content-Type: application/json' -H 'X-Auth-Token: gAAAAA<...>' -d '\ { "ipsec_site_connection": { "description": "New IPsec connection" } }' https://<node_IP_addr>:9696/v2.0/vpn/ipsec-site-connections/324dc68b-bdee-4a78-9d14-3484d8ee97a9
Response
Parameters
Name | In | Type | Description |
---|---|---|---|
ipsec_site_connection
|
body | object | An ipsec_site_connection object. |
auth_mode (Optional) |
body | string | The authentication mode. A valid value is psk , which is the default. |
ikepolicy_id
|
body | string | The ID of the IKE policy. |
vpnservice_id
|
body | string | The ID of the VPN service. |
local_ep_group_id (Optional) |
body | string | The ID for the endpoint group that contains private subnets for the local side of the connection. You must specify this parameter with the peer_ep_group_id parameter. |
peer_address
|
body | string | The peer gateway public IPv4 or IPv6 address or FQDN. |
id (Optional) |
body | string | The ID of the IPsec site-to-site connection. |
route_mode (Optional) |
body | string | The route mode. A valid value is static , which is the default. |
ipsecpolicy_id
|
body | string | The ID of the IPsec policy. |
peer_id
|
body | string | The peer router identity for authentication. A valid value is an IPv4 address, IPv6 address, e-mail address, key ID, or FQDN. Typically, this value matches the peer_address value. |
status
|
body | string | Indicates whether the IPsec connection is currently operational. Values are ACTIVE , DOWN , BUILD , ERROR , PENDING_CREATE , PENDING_UPDATE , or PENDING_DELETE . |
psk
|
body | string | The pre-shared key. A valid value is any string. |
name (Optional) |
body | string | A human-readable name of the resource. Default is an empty string. |
description (Optional) |
body | string | A human-readable description for the resource. Default is an empty string. |
initiator (Optional) |
body | string | Indicates whether this VPN can only respond to connections or both respond to and initiate connections. A valid value is response-only or bi-directional . Default is bi-directional . |
admin_state_up
|
body | boolean | The administrative state of the resource, which is up (true ) or down (false ). |
tenant_id
|
body | string | The ID of the project. |
project_id
|
body | string | The ID of the project. |
interval (Optional) |
body | integer | The dead peer detection (DPD) interval, in seconds. A valid value is a positive integer. Default is 30. |
mtu
|
body | integer | The maximum transmission unit (MTU) value to address fragmentation. Minimum value is 68 for IPv4, and 1280 for IPv6. |
peer_ep_group_id (Optional) |
body | string | The ID for the endpoint group that contains private CIDRs in the form <net_address>/<prefix> for the peer side of the connection. You must specify this parameter with the local_ep_group_id parameter. |
dpd (Optional) |
body | object | A dictionary with dead peer detection (DPD) protocol controls. |
timeout
|
body | integer | The dead peer detection (DPD) timeout in seconds. A valid value is a positive integer that is greater than the DPD interval value. Default is 120. |
action
|
body | string | The dead peer detection (DPD) action. A valid value is clear , hold , restart , disabled , or restart-by-peer . Default value is hold . |
local_id (Optional) |
body | string | An ID to be used instead of the external IP address for a virtual router used in traffic between instances on different networks in east-west traffic. Most often, local ID would be domain name, email address, etc. If this is not configured then the external IP address will be used as the ID. |
Status codes
Success
Code | Reason |
---|---|
200 - OK
|
Request was successful. |
Error
Code | Reason |
---|---|
400 - Bad Request
|
Some content in the request was invalid. |
401 - Unauthorized
|
User must authenticate before making a request. |
404 - Not Found
|
The requested resource could not be found. |
Example
{ "ipsec_site_connection": { "id": "324dc68b-bdee-4a78-9d14-3484d8ee97a9", "tenant_id": "284a2547ea8445d1be0e68ef2d76672c", "name": "vpnconnection1", "description": "New IPsec connection", "peer_address": "10.136.18.138", "peer_id": "10.136.18.138", "local_id": "", "route_mode": "static", "mtu": 1500, "auth_mode": "psk", "psk": "secret", "initiator": "bi-directional", "dpd": { "action": "hold", "interval": 30, "timeout": 120 }, "admin_state_up": true, "status": "DOWN", "vpnservice_id": "d6116b75-db78-4d07-9911-226b4655838a", "ikepolicy_id": "94edd562-8b10-4e96-98d7-7b8b99d3ca5d", "ipsecpolicy_id": "805ab779-e91c-42db-b6b9-591156d9634e", "peer_cidrs": [], "local_ep_group_id": "646938a8-322e-44b3-ac35-60deadcd4252", "peer_ep_group_id": "e3b89342-73ee-42b9-8ee9-fd91ec36aceb", "split_selector": false, "project_id": "284a2547ea8445d1be0e68ef2d76672c" } }