6.5. Monitoring Physical Disks¶
The S.M.A.R.T. status of physical disks is monitored by the
smartctl tool installed along with Virtuozzo Infrastructure Platform. For it to work, S.M.A.R.T. functionality must be enabled in the node’s BIOS. The tool is run every 10 minutes as a
cron job also added during installation. The
smartctl tool polls all physical disks attached to nodes in the cluster, including caching and journaling SSDs, and reports the results to the MDS server.
You can view disk poll results for the last 10 minutes in the output of the
vstorage top command. For example:
If the SMART warning message is shown in the main table, one of the physical disks is in pre-failure condition according to S.M.A.R.T. Press d to switch to the disks table to see more details. For example:
The disks table shows the following parameters:
- Disk name assigned by operating system.
Disk’s S.M.A.R.T. status:
- The disk is healthy.
The disk is in pre-failure condition. Pre-failure condition means that at least one of these S.M.A.R.T. counters is nonzero:
- Reallocated Sector Count
- Reallocated Event Count
- Current Pending Sector Count
- Offline Uncorrectable
- Disk temperature in Celsius.
- Disk capacity.
- Disk serial number.
- Disk model.
- Disk’s host address.
To disable S.M.A.R.T. disk monitoring, delete the corresponding