2.1. Choosing Servers¶
First, you should decide on the servers to participate in the PXE installation. You need these servers:
- PXE server. This is a server allowing your servers to boot and install Virtuozzo Storage over the network. Any server capable of running a Linux operating system and having a network interface card (NIC) can play the role of a PXE server.
- DHCP server. This is a standard DHCP server serving computers on your network with the necessary TCP/IP settings. You can use an existing DHCP server, if you have one, or set up a DHCP server from scratch. In the latter case, you can install it on the PXE server or use a dedicated server.
- Virtuozzo Storage server. This is a server running Virtuozzo Storage. The server must meet the requirements described in the Virtuozzo Storage 2 Installation Guide. In addition to the requirements listed in this chapter, the server must have a NIC with PXE support to be able to boot from the PXE server.
- HTTP server. This is a server storing the Virtuozzo Storage installation files. You can use an existing HTTP server, if you have one, or set up an HTTP server from scratch. In the latter case, you can install it on the PXE server or use a dedicated server.
This guide assumes that you will store the installation files on an HTTP server and use HTTP as the installation protocol.
Version 2.3 — Feb 19, 2018