6.5. Physical Server Dashboard Overview

The physical server Summary page shows the current status of the physical server and virtual environments residing on it as well as server configuration and resource consumption.

The Server State section informs you on everything related to resources and updates:

Field

Description

Status

Shows if the physical server is running (online) or not (powered off, offline). If the physical server goes offline, the status is changed automatically.

Software Status

The current status of VA packages installed on server. Packages that do not need to be updated are marked Up-to-date.

RAM + Swap Usage

The total percentage of the current physical server utilization in terms of both allocated memory and, if swapping is on, swap space.

Disk Usage

The percentage of the available disk space currently in use by the server.

CPU Usage

The percentage of the CPU power used by the physical server at the moment the current Virtuozzo Automator page was generated.

CPU Load Average

The last 1, 5, and 15 minutes system load averages.

Uptime

The time that has passed from the last physical server start.

The License section shows the information on the physical server license:

Field

Description

Status

The status of the license. You can click the status link, to install a new license (if no license is installed on the physical server), or to view the installed license details.

Expiration

The expiration date and time of the license.

Limits

Running Virtual Environments

The total number of virtual environments you can simultaneously run on the physical server.

Note

This parameter is only supported for Virtuozzo Hybrid Server 7.

Running Containers

The total number of containers you can simultaneously run on the physical server.

Note

This parameter is only supported for Virtuozzo 6 servers.

Running Virtual Machines

The total number of virtual machines you can simultaneously run on the physical server.

Note

This parameter is only supported for Virtuozzo 6 servers.

The Server Configuration section displays the configuration of the physical server:

Field

Description

Software

Automation Product

The automation software installed on the physical server.

Virtualization Product

The virtualization product installed on the physical server.

Hardware

Architecture

The description of the processor model(s) installed on the server.

Network

Hostname

The hostname of the physical server.

IP Addresses

Enumerates all the IP addresses the server has on all its network interfaces.

In the Virtual Environments section, you can see the number of running and stopped virtual environments.

The Resource Alerts section provides information on the server resource consumption:

  • green circle: the server operates normally,

  • yellow circle: some server resource is approaching its soft limit,

  • red circle: some server resource has exceeded its soft limit.

Column

Description

Alert

The name of the resource parameter that has generated the alert.

Current

The current value of the resource parameter.

Soft Limit

The limit on the resource parameter that can be temporarily exceeded.

Hard Limit

The limit on the resource parameter that cannot be exceeded under any circumstances.

For details on resource alerts, refer to Viewing Infrastructure Alert Logs.

The Disk Partitions and Memory sections inform you about the respective resources consumption on the physical server.

The information on the Disk Partitions size usage in all the partitions existing on your physical server is presented in the following tables (corresponding to the number of partitions):

Column

Description

Mount Point

The name of the partition/logical disk using the resource.

Used

Used amount of disk size in the partition.

Free

Free amount of disk size in the partition.

Total

The total amount of disk size allocated for the partition.

The information on the Memory usage is displayed in the following way:

Field

Description

Physical memory

The percentage of the current physical server utilization in terms of allocated memory.

Swap Space

The percentage of the current physical server utilization in terms of allocated swap space. The bar is not displayed if swapping is not configured on the physical server.

RAM+Swap

The simple average of the resources above.

The Resources Commitments section provides summarized information on the disk and memory resources promised to all the virtual environments hosted on the physical server. The Value column displays how much resources have been promised; the Percentage column shows how much of them are currently being used by virtual environments. If at least one virtual environment is promised unlimited resources, the Value column shows “Unlimited”, and the Percentage column - “n/a” for the corresponding resource.

For more details on the physical server resource consumption, see Monitoring Physical Server Resources Consumption.